Money blog: 600 new skyscrapers ‘on way’ for London, report finds

By Emily Mee, Money team

No one likes the date in their calendar when their MOT rolls around. 

But to make things a little less stressful, consumer expert Scott Dixon – known as The Complaints Resolver – has given us some tips on what to look out for to help your vehicle pass with flying colours. 

Some of the most common failures are faulty steering, brakes, suspension, worn or damaged tyres, cracked windscreens and faulty lights. 

Mr Dixon recommends you get your car serviced a couple of weeks before your MOT, in case there are any complex or costly issues. 

This will give you time to get them fixed and get your car through first time without any advisories. 

Aside from taking your car for a service, there are also some easy checks you can run yourself… 

Suspension

Listen for unusual clunks while you’re driving – this could be a sign of a damaged suspension. 

You could also check by pushing the car down on each corner. It should return to normal without bouncing a few times. 

Another option is to look with a torch under the wheel arch, as this should reveal any obvious defects. 

Lightbulbs

Blown bulbs are a common MOT failure, but they’re cheap to fix. 

Walk around your car and check all the bulbs are working – this includes the headlights, sidelights, brake lights, indicators and the number plate bulb.

Mr Dixon says it’s “not an easy job” to change the lightbulbs yourself on most modern cars, as the MOT will also check the positioning of the light. Therefore he recommends getting this done professionally. 

Brakes

Squealing or grinding noises may be a sign your brake pads need replacing. 

You should also check whether your car stops in a straight line, or whether it pulls in different directions. 

Don’t forget about the handbrake, too. Test it out on a slope and see if it securely holds the car. If it doesn’t, you should get it adjusted. 

Wipers

It’s easy to check if your wipers work okay, but you should also make sure to inspect the blades for tears and rips. 

They should be able to clean the windows with no smears. 

Mr Dixon says you don’t need to pay Halfords to change your wiper blade as you can “do it yourself in seconds”. All you need to do is look for a YouTube tutorial. 

He also recommends buying the Bosch wiper blades, as he says these are good quality and will also be a sign you’ve looked after your car well when you come to sell it. 

Tyres

One thing to look out for is tread depth. You can do this by looking for the “wear bar” that sits between the tread. 

If it’s close to 1.6mm and is low, you should get the tyre replaced so it’s not flagged as an advisory. 

Also check for perished tyre walls, which can happen when a vehicle is standing for any length of time. 

Uneven tyre wear is another potential issue, and if there are signs of this you should get the tyre replaced and tracking and suspension checked. 

Seat belts

These must be in good condition and working order, with no tears or knots. 

Registration plates

Your number plates should be clean and visible with a working light bulb at the rear. You may need to give them a wipe and replace the bulb if necessary. 

Bodywork

This should be in good condition, without damage such as loose bumpers or sharp edges. 

Mr Dixon advises against using automatic car washes during your car’s lifetime, saying they “wreck your car”. 

“It’s not just your paintwork but they can also damage the wiper blades and the bodywork,” he says. 

Check for warning lights

You’ll need to take your vehicle to a trusted garage or mechanic for this. 

Exhaust emissions

Some diesel vehicles can fail their MOTs based on emissions. To avoid this, you can buy a fuel treatment pack and take your car for a good run to clear the fuel lines and tank.

Driving for at least 30 to 50 minutes at a sustained speed on a motorway or A-road should help to clear the filter. 

Windscreen

You should make sure the driver’s view of the road isn’t obstructed, so check for stone chips at eye level and remove any obstructions such as air fresheners and mobile phone cradles. 

What else should you think about? 

Make sure your car is clean beforehand, as a tester can refuse to do your MOT if the vehicle is filthy and full of rubbish. 

Giving your car a clean can also give you a chance to inspect it, Mr Dixon says. 

Another thing to do is to check last year’s MOT for any advisories that might crop up this time. 

These potential issues will still be there – so it’s best not to ignore them. 

You can check your vehicle’s MOT history using https://car-check.co.uk.